Top 7 Best Corded Hammer Drill (2023 Guide)

Option #1: SKIL 7.5-Amp 1/2-Inch Corded Hammer Drill

Option #2: DEWALT Hammer Drill ½ inch, 10 Amp

More info

The DeWalt ½ inch, 10 Amp, corded hammer drill is a real work horse.

It comes equipped with De Walt’s patented technology that delivers over 50% more power for the added level of durability. It is well designed fit for drilling and hammer drilling through wood, cement, steel and masonry.

Typical to its name it has the dual functionality of hammering and drilling.

In hammer mode, you would be surprised to know that it has a variable blow/min rate of between 0 – 56,000 RPM.

What I really like about this specific corded hammer drill is that the overall metal casing is extremely robust. So you can easily use this tool at construction sites without needing to be overly worried about it getting bumps or bruises.

The side handle has 360° of maneuverability, and it is able to lock in any one of the positions. This side stabilizing handle is also removable.

This drill however does not have a setting for only hammering (like a sledge hammer), and the hammer mode is a combination of drilling and hammering. Another great feature about this corded hammer drill is that it is reversible.

This tool however as you can expect is not perfect. There are a couple of things that could definitely be improved.

It get’s hot when operated and used continuously for 10 to 15 drills. The instruction manual is also quite poor. A lot of people who purchased this complained quite heavily about the instructions in the manual.

However it is worth noting that you must use the instruction manual in order to learn how to open and lock the chuck correctly.

With all of those being said, it has quite a precise guide with gives very accurate depth control measurements during drilling activities.  

If you are after a mid-range tool that is great for occasional DIY use you cannot go wrong with the DeWalt ½ inch, 10 Amp, corded hammer drill which makes it one of the best corded hammer drills on the market.

Option #3: BOSCH 11255VSR Bulldog Xtreme - 8 Amp 1 Inch Corded

More info

The BOSCH 11255VSR Bulldog Xtreme – 8 Amp, motor is a serious power tool fit for onsite usage.

It has 3 operating modes namely: rotation only, rotary hammer and hammer mode only.

The fact that you can choose to use hammer mode only makes this power tool a good handheld substitute for a small jackhammer especially for DIYers on tasks within the house.

It has all the typical functionality you would expect to see and find within a tool that would make the list as one of the best corded hammer drills.

It has a conveniently designed SDS plus bit system that allows for bit changes that can occur tool free. This mechanism is fully equipped with an automatic bit lock and dust protection that ensures complete drill or hammer efficiency.

What is really impressive about this hammer is that it is capable of delivering 2 ft/lb of high impact energy during it’s maximum performance.

Taking a deeper dive technically this power tool has the ability to provide an amperage of 7.5A with a keyless chuck design and chuck size of 3-4 inches. It has a cord length that is reasonable at 8 feet long operating at a voltage of 120V.

This tool comes equipped with the rotary hammer, auxiliary handle, depth gauge and a carry case.

If you are in the market for the best corded hammer drill for use on construction sites and high dust environments, the BOSCH 11255VSR power toll might be just the right one for you.

Option #4: PORTER-CABLE Hammer Drill, ½ inch, 7 Amp

More info

The  PORTER-CABLE Hammer Drill is a great utility tool to have in your toolbox. It is one of the best corded hammer drills due to it’s overall ergonomic design and powerful 7 A motor.

This drill is capable of producing up to 300 Watts of power on 110V. It is extremely compact only weighing 5.19 pounds and having overall product dimensions of 12.25 x 3.25 x 9.25 inches.

What I really like about this drill is that it is durable and made to operate under high stress environments such as drilling through masonry and cement. This hammer drill can pack a serious punch for it’s overall weight and size.

The improved efficiency can be related largely to it’s cast-metal gear housing. This specifically dissipates heat ensuring that internal components can operate at their optimal points for longer.

You will also be able to interchange this drill between various operating modes namely the drill and hammer, thereby allowing drilling through all sorts of material such as concrete, masonry, wood and steel.

It is worth noting however that this tool is not design to remove tiles, and if you were after something that is capable of moving tiles you would need to search for an SDS rotor hammer that has a chisel bit.

The side handle is not as great as it could be, and many people even complain that grip together with the depth gauge are not as firm as they could be.

It is also noted that this drill jammed a couple of times when trying to go through dense concrete.

With that being said this drill has a two finger variable speed trigger capable of providing one with a lot of control through out the operating speeds from 0 – 3100 RPM. The cord is also about 8 feet long which is a reasonable length.

If you are after a mid-range corded hammer drill capable of heavy duty work around the house and in circuit DIY settings the PORTER-CABLE Hammer Drill could be the tool for you.

Option #5: BOSCH HD18-2 Two-Speed Hammer Drill

More info

The BOSCH HD18-2 Two-Speed Hammer Drill is an incredible tool to have in your arsenal.

It comes together with a powerful 8.5A motor that is equipped with two speed operation. From 0-1200 RPM High torque low speed for drilling into metal and wood. Also a 0-3000 RPM high speed low torque application for drilling and hammering through masonry and cement.

It has a great additional security feature in the form of an integral slip clutch. This basically is a mechanism that disengages the output shaft should the bit get into a bind situation.

The pistol grip handle is another incredible feature of this drill. It is ergonomically designed allowing for smooth handling and operation.

The two finger trigger allows for variability and ease of overall use. This corded hammer drill also has the functionality of operating in reverse. This is fantastic for removing nails, fasteners and bound bits.

Technically this drill has a keyed chuck design with a chuck size of ½ an inch.

Many operators using this power tool have often complained saying that the drill is a bit on the heavier end for its overall product dimensions, with a weight of 5.8 lb.

The HD18-2 Two speed Hammer drill comes together with a 360° Auxiliary handle, a depth gauge and a keyed chuck.

Upon reviewing the various datasheet information, I was thoroughly surprised to learn that this drill has a rotating brush plate. What this means is that you will get more life on your brush and it will provide equal power whether rotating in the forward or reverse direction.

On top of all the above, this is a really tough drill. The metal gear housing is designed for long life and durability.

If you are after the best corded hammer drill in my opinion, the BOSCH HD18-2 Two-Speed Hammer Drill is head over heels above it’s competitors.

Option #6: CRAFTSMAN Drill / Driver, 7-Amp, 1/2-Inch

More info

The CRAFTSMAN Drill is a nifty corded hammer drill that is perfect for home use and small jobs around the house.

It has a powerful 7 A motor with a ½ inch keyed chuck. It also has the option of operating in the drill or hammer mode with a the ability to operate at speeds up to 3100 RPMs.

It also has the ability to provide up to 52 700 blows per minute in hammer mode as well. What I really like about this hammer drill is that it has the ability to provide for a lock-on trigger that helps maintain the speed without you needing to keep your fingers on the trigger.

There are a couple of negatives about this drill however, many purchasers have noted that the side handle is not very sturdy when drilling into hard material such as masonry or cement.

It is also a bit heavier than you would expect.

However with all that being said, this corded hammer drill has a great 3 year warranty.

Option #7: ENEACRO 1-1/4 Inch SDS-Plus 12.5 Amp Heavy Duty Rotary Hammer Drill

More info

The ENEACRO Rotary Hammer is a real work horse of a corded hammer drill. It can reach no load speeds of up to 880 RPM with blows per minute of up to 4350.

With this hammer drill you will get a couple of accessories as listed below:

• 2*SDS-Plus Chisel 10"(Flat and Point)
• 3*SDS-Plus Drill Bits
• 1*Spanner
• 1*Grease
• 1*Dust Proof Cap*1
• 2*Carbon Brush
• 1*Auxiliary Handle
• 1*Carry Case

This corded hammer drill has a 12.5A heavy duty motor that is made from 200°C resistant copper wires, capable of working for long without the motor burning up. One critical item that makes this drill safe is that the 1500 W motor is also equipped with a safety clutch.

This safety clutch ensures that the motor is designed to complete heavy duty drilling operations with a lot more ease.

This is a true workman’s drill. It is specifically made to be used in extremely harsh conditions were there is a lot of dust. The dustproof system has a double layer anti-dust design which practically stops any dust particles from entering the motor housing.

You will also find that the handle is capable of a full 360° degrees of adjustability. This ensures that anyone operating this machine can work for long hours without feeling tired. It also ensures that you have adequate leverage especially if you are going to be drilling in awkward situations or locations.

Furthermore, there is an SDS Plus keyless chuck which is designed to ensure that you will never need any tool to change drill bits during your different drilling jobs.

Overall this drill is ergonomically designed with a double layer of vibration control dampers, a heat exhaust control system and a soft grip handle that ensures minimum fatigue throughout the job and maximum operational efficiency.

If you are after a heavy duty drill that can basically do it all, then the ENEACRO Rotary Hammer is definitely one of the best corded hammer drills for you on the market.