Top 5 Best Table Saw Under 1000 Dollars (2021 Guide)

Are you in the market for the Best Table Saw Under 1000 dollars?

Superb – you are in the right place!

In this ToolsGaloreHQ.com guide you will learn 

  1. Technical parameters of the best
  2. What to avoid when looking to buy
  3. My overall #1 pick
  4. And So Much More
best table saw under $1000
ImageProduct
digital-business-prep-table__image
DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS)
  • 24-1/2 inch rip capacity
  • Tool free guard with riving knife changes
  • Rack and Pinion system
  • 24-1/2 inch rip capacity
  • Tool free guard with riving knife changes
  • Rack and Pinion system
View on Amazon
digital-business-prep-table__image
BOSCH 10 In. Worksite Table Saw
  • Powerful 15 A table saw
  • Up to 3650 RPM
  • Soft start capability, minimizing surge current
  • Powerful 15 A table saw
  • Up to 3650 RPM
  • Soft start capability, minimizing surge current
View on Amazon
digital-business-prep-table__image
SKIL 15 Amp 10 Inch Table Saw - TS6307-00
  • Rack and pinion fence rails
  • Great cutting capacity
  • 2°- 47° Bevel Capacity
  • Rack and pinion fence rails
  • Great cutting capacity
  • 2°- 47° Bevel Capacity
View on Amazon
digital-business-prep-table__image
SKILSAW SPT99T-01 8-1/4 Inch Portable Worm Drive Table Saw
  • Maximum torque due to worm drive gearing
  • Precise rack and pinion system
  • Up to 25 inch rip capacity
  • Maximum torque due to worm drive gearing
  • Precise rack and pinion system
  • Up to 25 inch rip capacity
View on Amazon
digital-business-prep-table__image
DEWALT 10-Inch Table Saw, 16-Inch Rip Capacity (DW745)
  • Steel roll cage for impact protection
  • Very powerful 1850 W motor
  • Max to left of blade (12 inch) and right of blade (20 inch)
  • Steel roll cage for impact protection
  • Very powerful 1850 W motor
  • Max to left of blade (12 inch) and right of blade (20 inch)
View on Amazon

Overall #1 Rated Pick

Updated On October 8, 2021

Best Table saw under $1000

DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS)

The De Walt 10 inch Table Saw is truly one of the best table saws under 1000 dollars that you will find on the market.

It is equipped with a powerful 15 A motor and the ability to have a rip capacity of 32-1/2’’ which make cutting through various types of wooden material so much easier.

It has a large telescoping fence system that ensures simple and easy to adjust fencing. What I really like about this table saw is that it is ergonomically designed with patented material support making it exceptionally good for rip cuts.

The storage system is something that is also very cool. You will have simple and ease of access to many of your accessories such as the blade guard, your riving knife and the fence.

Technically it is superbly sound. The arbor size is 5/8 inches, having a blade diameter of 10’’. When it comes to performing cuts at depth it is capable of 2-1/4 inch depth cuts at 45°, and 3-1/8 inch with a depth cut at 90°.

To top it of it is well equipped with a dust port that ensures your saw space remains as dust free as possible. This dust port has a diameter of 2-1/2 inches and can very easy be integrated with different types of dust vacuums.

When looking at the rip capacity either side it has a maximum rip to the left of the blade of 22 inches and a maximum rip to the right of the blade of 32-1/2 inches.

You can easily use various saw blades with this machine. Be it your rip cut blade, cross cut blade, combination or composite blade. It has a reasonable no load speed of 4800 RPM as well.

This table saw however is not perfect and it is worth noting a few things that could be improved.

The rack and pinion rail system can often lock into the outer rail. What this means is that this outer rail adjustment will almost become impractical to turn.

People have also complained that they have had to replace the lock head as it very easily becomes contaminated with alimunium dust especially if when cutting into metals.
The lock head is a component that cost about $30, so it is worth considering this when looking to purchase this machine.

Lastly, you should operate the machine with a certain level of caution as what typically happens is your clothes can often get stuck in the attachment point on the far left hand side of the rack.

With all of these being said this is still a powerful table saw, it is definitely an improvement on the previous De Walt models (7480) and the 7490X.

If you are in the market for one of the best value for money table saws under 1000 dollars, you can rest assured that the DeWalt DWE7491RS Table Saw will not disappoint.

It is flexible and powerful and definitely one of the best table saws under 1000 dollars on the market.

Quick Summary of the Best Table Saw Under 1000 Dollars 

Need to rush off? Not an issue at all, I have summarized the top options below. I fully get not everyone has the time to be digging into long blog posts about the best table saws under 1000 dollars.

  1. DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS)
  2. BOSCH 10 In. Worksite Table Saw
  3. SKIL 15 Amp 10 Inch Table Saw - TS6307-00
  4. SKILSAW SPT99T-01 8-1/4 Inch Portable Worm Drive Table Saw
  5. DEWALT 10-Inch Table Saw, 16-Inch Rip Capacity (DW745)

If however you want more detailed information, I have catered for you as well in this guide. Please keep reading.

Why This Guide For Best Table Saw Under 1000 Dollars

Having a high quality table saw under 1000 dollars can really mean the difference between a 30 minute job and a job that can take between 3 to 4 hours.

These machines are equipped with all sorts of mechanisms. These include cast alimunium table tops, riving knifes, and the ability to interchange between various types of blades.

You will also be able to perform rip cuts, dado cuts and cross cuts with relative ease.

However a quick search online can often leave you very confused. I know the feeling.

You find yourself stuck reading review and review, diving deep into product manuals and trying to decipher between marketing materials and the real operational performance.

That is why I created this guide to minimize the time required to find the best table saw under 1000 dollars. I have undertaken all of the heavy lifting myself so that you do not have to do it on your own.

I have read through countless product reviews, visited many manufacturers websites and even dug deep into instruction and product manuals to ensure that you are only receiving the best.

Furthermore, I keep this guide constantly updated making sure that you are getting the most relevant information at your finger tips to help you make the most informed purchasing decision.

Read More:>>> Find the Best Table Saws for Beginners

best table saw under $1000


What Are The Important Considerations For The Best Table Saw Under 1000 Dollars

Technical ability

One of the key and critical aspects to ensure when purchasing a table saw under $1000 is to make sure that it is capable of technically performing in accordance with your specific needs.

Some people require specialty cuts, whilst others are more concerned about the efficiency of the rip cut or the variability of the bevel angle. Whatever it may be sure to check and read the technical parameters carefully.

All the table saws in this guide have been thoroughly reviewed, to include the widest range of technical capabilities per table saw on the market. So you can rest assured that these are the most versatile table saws under $1000.

Weight and product dimensions

Generally speaking your table saw should be between 40 – 60 pounds in overall weight. Some are heavier such as construction site table saws or hybrid saws. The weight is not too much of an issue, but if you intend on moving this table saw around quite a bit. The heavier it is overall the more cumbersome it will become.

So always purchase a table saw with your ultimate purpose and general use case in mind.

Read More:>>> How to use a Hole Saw Properly

Portability

Probably my favourite thing about the best table saws under 1000 dollars is that most of them have been ergonomically designed to ensure that you can very easily move them around and store them when not in use.

What To Avoid When Buying The Best Table Saw Under 1000 Dollars

Buying cheap accessories

It’s the unfortunate nature of purchasing table saws, but what you will often find regardless of whether you buy high end or lower end saws. Most manufacturers focus solely on the actual table saw.

Hence some produce very average accessories such as miter gauges, saw blades and/or push sticks.

The only work around this is to purchase your own. The temptation is to try and purchase cheap accessories. Do not do this, buy high enough quality so that it can last through the rigorous sawing environment.

No warranty information

This is an absolute no-no. Always ensure that your table saw manufacturer has at least 1 year limited warranty on the equipment. The real best have up to 3 years of limited product warranty.

All the top table saws under 1000 dollars in this guide have a warranty of 1 year or greater.

New Market entrant

Avoid buying table saws from brand new original equipment manufacturers, especially those that  have less than 5 years of experience and do not have omni-channel global sales business.

The reason is such companies tend to be on the poorer end when it comes to customer service, they are practically in the start up phase.

In this guide I ensured that I only ever included established table saws.

However if you want to look at new players in the game make sure that they at the very least have a functioning customer service team and they honor warranty claims.

Read More:>>> The Best Hybrid Table Saws For Your Needs

Deep Dive Review of the Best Table Saw Under 1000 Dollars

Option #1: DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS)

Specification

Value

Speed

4800 RPM

Weight

90 pounds

Saw Blade Diameter

10 inch 24 tooth carbide blade

Warranty Period

3 year limited

Product Dimensions

31 x 24.5 x 31 inches

Pros

  • Max rip to left of the blade of 22 inches
  • Max rip to the right of the blade of 32-1/2 inches
  • Maximum dado width – 13/16 inches
  • Rack and pinion system for improved accuracy
  • High performance and high torque motor of 10.5 A

Cons

  • Attachment point on the left hand side of the rack can often interface and catch onto clothes

Option #2: BOSCH 10 In. Worksite Table Saw

Specification

Value

Speed

3650 RPM

Weight

94 pounds

Saw Blade Diameter

10 inch diameter

Warranty Period

3 year limited

Product Dimensions

32.5 x 27 x 13 inches

Pros

  • Soft start motor capability
  • Riving knife and anti-kickback guard system
  • Powerful 15 A motor with 4 HP
  • Onboard storage for all components
  • Cast iron alimunium top

Cons

  • It is slightly on the heavier end of table saws this size

More Info

The BOSCH 10 inch Worksite Table saw is a real workhorse.

It is equipped with a powerful 15 A motor with a maximum of up to 4 HP and 3650 RPM. Making it extremely strong, and versatile.

It is capable of performing all the various cuts you would expect of a table saw under 1000 dollars. Dado, cross cuts and rip cuts.

What is really great about this table saw is the overall ergonomic design. It has gravity-rise wheeled stand. This combined with the fact that you can easily fold the table saw makes it extremely portable and easy to store.

There are a couple of really big striking features when looking at the BOSCH 10 inch worksite table saw. The large case alimunium to is one of those. It’s so large that it affords one the ability to have 30 inches in which you can perform rip cuts.

Electrically this saw is one of the best. It has specifically design internal circuitry that assist the motor with soft start capability. This is great because it prevents the motor from tripping circuit due to large inrush currents typical of motor transients.

It also has feedback circuitry that help maintain the speed of the saw blade at a constant level even when the load or saw material is changing.

For a table saw with the dimensions of 32.5 x 27 x 13 inches it is a bit on the heavier end coming in at about 94 lb.

However with that being said, the arbor is 5/8’’ with a bevel angle range between -2° to 47°. Coming in with a blade diameter of 10 inches.

There are a couple of really cool additional accessories that can help you when performing your cuts. These are the miter gauge, the push stick, the throat plate insert, the multi-function blade wrench and an adjustment wrench.

The power tool is very elegant in it’s overall operation according to some buyers. They further note that it is almost vibration free in it’s overall operation.

I am a big fan of after sale support and I must say that BOSCH has great user manuals and customer services for any issues.

One last thing worth mentioning is that this BOSCH table saw has an arbor lock making it very easy to interchange different saw blades.

 If you are after a table saw that is powerful, flexible and very comfortable to operate, then the BOSCH 10 In. Worksite Table Saw is a great option as one of the best table saw under 1000 dollars without a doubt.

Option #3: SKIL 15 Amp 10 Inch Table Saw - TS6307-00

Specification

Value

Speed

4600 RPM

Weight

51.2 pounds

Saw Blade Diameter

10 inch blade

Warranty Period

3 year limited

Product Dimensions

27.17 x 28.74 x 16.93 inches

Pros

  • Max cutting depth of 0° to 45° with a Bevel of 3.5 inches to 2.5 inches
  • Maximum rip left of the blade = 14 inches
  • Maximum rip of blade right of blade = 25.5 inches
  • Total current rating of 15 A with a table width and length of 24 x 25 inches
  • Ergonomic design

Cons

  • Some buyers are not really impressed with the alimunium top. Stating that the finishes are not very clean.

More Info

The SKIL 15 Amp 10 inch Table Saw is one of the best table saws under 1000 dollars.

The rack and pinion fence rails are a very good addition that help ensure that the fence maintains it’s overall positions and ensures proper and straight firm cuts.

The 15 A motor, is quite powerful and can very easily rip or cross cut through wood with a lot of ease. It is ergonomically designed with integrated foldable legs that make storage and keeping this table saw easy overall.

The alimunium cast table top is equipped with 10 inch, 24 tooth carbide tipped blade. Since this blade is a 24 tooth type it is designed for rip cuts.  You would need to purchase cross cuts blades or composite blades yourself if you wanted to have replacement blades.

It has a 0 to 45° bevel capacity with a quick release level making various cuts easy to implement.

Technically this SKIL table saw is the real deal when looking at the bevel capacity, it can perform 3.5 inch and 2.5 inch bevel cuts at 0° to 45° respectively.

What I must say is super impressive about this table saw is that the user manual and supporting information is extremely good. Typical of SKIL – they take exceptional care at ensuring that their supporting documents are well designed and easy for potential customers to consume and use.

The accessories seem quite well made. However the miter gauge could have been made slightly better.

However this is a seriously strong table saw. It is lightweight can fold very easily. It has a very impressive dust collection system and mechanism, and can easily be connected to a shop vac with a cyclone.

If you are after a really high quality table saw that can pack a punch and is overall ergonomically designed to supplement any workshop, then the SKIL 15 Amp 10 inch Table Saw is most definitely one of the best table saw under 1000 dollars that you can find on the market today.

Option #4: SKILSAW SPT99T-01 8-1/4 Inch Portable Worm Drive Table Saw

Specification

Value

Speed

5300 RPM

Weight

51.2 pounds

Saw Blade Diameter

8-1/4 inch

Warranty Period

180 Day Stay True + 1 year limited warranty

Product Dimensions

25.2 x 25.75 x 14.88 inches

Pros

  • Great rack and pinion system for precise cuts
  • Perfect for jobsite usage with a depth cut of 2-5/8 inches and 25 inch rip capacity
  • Patented dual-field motor
  • Great portability
  • Max width of dado = 0.5 inches

Cons

  • The Skilsaw blade that comes with the table saw is not great, you probably need to get your own

More Info

The 8-1/4 inch portable SKIL table saw is another one of the best table saws under 1000 dollars.

This table saw is unique in that it has a worm drive gearing. This gearing provides and offers maximum torque and stability during cuts allows for more efficient and clean cuts overall.

The table saw has a cord length of about 6 feet and requires a input voltage, frequency and current of 120V. 60Hz and 60A.

What makes this table saw very special and robust is that although it is designed for the jobsite use, it is extremely portable, having a very light and compact footprint making it very easy to transport and move around.

It is also ergonomically designed and very durable with an all metal construction making it nice and robust. SKIL are leaders when it comes to motor patents and designs for table saws and on this specific one they are no different.

The Patented Dual-Field ™ motor has been shown to operate smoother, more quietly and for longer period of time without specifically overheating, adding to the already impressive profile of this worm drive table saw.

Technically it also packs a serious punch having a motor that runs on a total amperage of 15 A with a no load speed of up to 5300 RPM.

It has a maximum kerf thickness of 2.0mm,  max cutting depth with a 0° bevel of 2-5/8 inches and 1-7/8 inches respectively for a bevel of 45°.

Looking at the rip cut maximums, it has a max rip left of the blade of 12 inches and a maximum rip right of the blade of 25 inches.

Furthermore you can expect a maximum width of dado to be 0/5 an inch.

 If you are in the market for a serious jobsite saw that is lightweight, robust, powerful and under 1000 dollars you cannot go wrong with the 8-1/4 inch portable SKIL table saw. It truly is one of the best table saw under 1000 dollars around.

Option #5: DEWALT 10-Inch Table Saw, 16-Inch Rip Capacity (DW745)

Specification

Value

Speed

3850 RPM

Weight

48.5 pounds - 22 kg

Saw Blade Diameter

10 inch 24 tooth carbide blade

Warranty Period

90 day money back, 3 year limited warranty

Product Dimensions

25.75 x 26.5 x 13.87 inches

Pros

  • Capable of 0° to 45° bevel angles
  • Powerful 1850 Watt motor
  • Max rip to left of blade (12 inches) and max rip right of blade (20 inches)
  • Fantastic overload protection mechanism
  • Fence provides 610 millimeter of rip capacity

Cons

  • Great for basic cuts – the miter gauge is not very effective

More Info

The De Walt 10 inch Table Saw, 16 Inch Rip Capacity (DW745) is probably the best high end table saw under 1000 simply because of what it offers.

The unit itself is not the lightest, coming in at 48.5 pounds (22 kg) and It is a bit of a hassle if you need to move it quite often however with that being said this table saw is capable of 0° to 45° bevel.

On top of this it has a bevel lock to ensure that the angle is maintained throughout

It has an extremely powerful 15 A motor, 1850 Watt motor capable of producing high quality cuts with ease. This is seen via the max rip to left of the blade of 12 inches and max rip right of the blade of 20 inches.

The cast iron table top design is great for ensuring accuracy and a large working area to place stock material for cutting.

Together with this table saw, you will get a standard 24 tooth SERIES 30 saw blade which is not that great, and you might want to swap it out with something that is more quality and robust.

There are a couple of things that I did not like about this table saw under 1000 dollars. The miter gauge is not that effective. Some reviewers mentioned that only about 10% of the dust is actually extracted from the exhaust port.

However with all of those being said it’s a real workhorse of a power tool.

If you want a heavy duty compact jobsite table saw that can pack a punch and is very portable then the De Walt 10 inch Table Saw, 16 Inch Rip Capacity (DW745) might be the best table saw under 1000 dollars for you.


My Overall #1 Pick: DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS)

This is my overall #1 pick simply because of the versatility, robustness and overall ergonomic design.

It is equipped with a great 10.5 A high performance motor.

The technical parameters are very functional with a maximum dado width of 13/16 inches and a maximum rip to left of blade of 22 inches.

Whilst having the maximum rip to the right of the blade at 32 – ½ inches.

It also has a very good dust port that can easily interface with many extractors.

The rack and pinion also provides for an overall improvement in cutting accuracy.

Find it on Amazon here




Final Thoughts On The Best Table Saw Under 1000 Dollars

As you can see buying a table saw under the 1000 dollar mark requires a little bit of attention to some key items. However it is not difficult at all when you know what to look for.

I hope this guide has really been helpful for you. I had a ton of fun creating this content. All the best on your purchase.

Mogale Modisane

Mogale Modisane

Mogale is a qualified B(Eng): Electrical Engineer. With experience working on large-scale Solar, Wind, and Hybrid Projects. He has been exposed to multiple tools throughout his career and has a keen interest in breaking down the often murky world of power tools, machines, and measurement equipment making them more accessible and understandable to everyone.

Leave a Comment

Mogale Modisane

Mogale Modisane

Mogale is a qualified B(Eng): Electrical Engineer. With experience working on large-scale Solar, Wind, and Hybrid Projects. He has been exposed to multiple tools throughout his career and has a keen interest in breaking down the often murky world of power tools, machines, and measurement equipment making them more accessible and understandable to everyone.

About ToolsGaloreHQ

Your premium online resource for all guides and how-to’s for all your tooling needs.

Recently Published Guides

0 Shares
Share via
Copy link
Powered by Social Snap